Maintenance method of lithium battery for electric bicycle
Special attention:
1. As the lithium battery belongs to the memoryless battery, customers are advised to regularly charge or recharge the battery pack after riding every time or every day, which will greatly improve the service life of the battery pack.
It is not recommended to ride until the battery pack does not discharge power and then charge each time. It is not recommended to discharge more than 90% of the battery pack capacity. When the electric vehicle is in static state and the under voltage indicator light on the electric vehicle is on, it needs to be charged in time.
2. When the electric vehicle starts, goes up steep road, earth rock road or strong wind state, it is recommended that the customer use the pedal power while riding, so that the battery and motor have the longest life.
3. The battery capacity is measured at room temperature of 25 ℃. Therefore, in winter, it is considered normal to exert the battery capacity and slightly reduce the driving distance. It is recommended to charge the battery pack in the place with high ambient temperature in winter to ensure that the battery pack can be fully charged.
4. When the electric vehicle is not riding or parked, it is recommended that the customer unplug the link plug between the battery pack and the electric vehicle, or turn off the power lock. Because the motor and controller will consume power in no-load state, please avoid power waste.
Longtaich LTC-A5000 Battery pack welder(www.longtaich.com) is a AC double pulse air driving spot welder for power tool battery pack welding, Lithium battery cell welding, mobile phone battery welding, laptop battery tabs welding, power bank battery welding, etc. This LTC-A5000 machine use diameter 3mm and 6mm electrodes holder, customer can change the electrodes easily to weld general nickel tabs or H form thick tabs.
www.longtaich.com sales@longtaich.com Skype: longtaich
Hits: 【Print】